Noco Battery Charger 12V 10A Fully Automatic Waterproof On Board ;

Noco Battery Charger 12V 10A Fully Automatic Waterproof On Board

Meet the all-new GENPRO10X1. Similar to our GEN1， only better. It’s 41% smaller and delivers 33% more power. It’s one of the best performing onboard marine battery chargers we have ever made. A one-bank onboard battery charger rated at 10A (10A per bank) for 12V batteries， including marine， boat， starter， and deep-cycle batteries. Independently charge and control each battery bank with selectable charging modes – including 12V， 12V AGM， 12V Lithium， and 12V repair mode – for all types of lead-acid and lithium-ion batteries. The charger is fully sealed with an IP68 rating which makes it a 100% waterproof. The charger is fully sealed with an IP68 rating which makes it a 100% waterproof. Even with the charger being completely sealed it features a new integrated thermal sensor offering thermal compensation down to -4 Deg F and up to 104 Deg F. With the chargers advanced diagnostics， it makes it completely automatic for year-round charging and no need to worry about undercharging or overcharging batteries. The Noco GENPRO series chargers offer several charging modes to meet your needs! The charger features the following charging modes: 12V mode: meant for charging wet cell， enhanced flooded， maintenance-free and calcium batteries， 12V AGM mode: meant for 12V AGM batteries， 12V Lithium mode: meant for 12V Lithium-Ion batteries including LifePo4 batteries for use on batteries that have a battery management system (often referred to as a BMS)， 12V repair mode: an advanced battery recovery mode to repair old， idle， or stratified batteries， force mode: this mode will attempt to recover a battery lower than 1V， charger will force output for 5 min to raise the battery voltage so that it can charge the battery normally.